The MDCAT result is out, and now every pre-medical student in Pakistan is asking the same question: “Mera aggregate kitna banega, and will I get admission in a government medical college?” Your merit is not decided by MDCAT alone. It is a weighted mix of your Matric, FSc and MDCAT marks. This guide explains the formula, gives you a free MDCAT aggregate calculator right on this page, shows worked examples, and explains recent closing merit trends so you can plan your college choices realistically.
For UHS MDCAT 2026, held on 20 September, the result was announced on 24 September; about 47,475 candidates appeared and around 79% qualified for MBBS. Admissions now depend on aggregates, so let us calculate yours.
MDCAT Aggregate Formula 2026
Under the PMDC admission framework used by UHS and other admitting universities, the aggregate is calculated like this:
| Component | Weightage | How to calculate |
|---|---|---|
| Matric / O Level (equivalence) | 10% | (Matric marks ÷ total marks) × 10 |
| FSc / A Level (equivalence) | 40% | (FSc marks ÷ total marks) × 40 |
| MDCAT | 50% | (MDCAT score ÷ 180) × 50 |
| Total aggregate | 100% | Add all three |
About the MDCAT paper
- 180 MCQs, no negative marking.
- Biology 81, Chemistry 45, Physics 36, English 9 and Logical Reasoning 9 MCQs.
- Passing marks: 55% for MBBS and 50% for BDS.
Weightage and rules are set by PMDC and the admitting university each year. Always confirm the current prospectus from UHS or your province’s admitting university before final decisions.
Free MDCAT Aggregate Calculator
Enter your marks below. If your board uses 1200 total marks for Matric or FSc, change the total box.
Enter your marks (10% Matric + 40% FSc + 50% MDCAT):
//
/ 180
If your FSc result is not yet final, you can use expected marks to get an estimate, but your admission will be based on official results and the rules in the prospectus.
MDCAT Aggregate Calculation: Worked Examples
| Student | Matric | FSc | MDCAT | Aggregate |
|---|---|---|---|---|
| A | 1050/1100 (9.55) | 1000/1100 (36.36) | 160/180 (44.44) | 90.35% |
| B | 1000/1100 (9.09) | 950/1100 (34.55) | 150/180 (41.67) | 85.30% |
| C | 900/1100 (8.18) | 800/1100 (29.09) | 150/180 (41.67) | 78.94% |
| D | 1150/1200 (9.58) | 1050/1200 (35.00) | 170/180 (47.22) | 91.81% |
| E | 1000/1100 (9.09) | 900/1100 (32.73) | 130/180 (36.11) | 77.93% |
Notice how MDCAT carries half the weight. Ten extra MCQs correct in MDCAT add about 2.78% to your aggregate, which is often the difference between two or three colleges in the merit list.
Closing Merit Trends (Approximate)
Closing merits change every year with the difficulty of the paper, number of candidates and seats. The figures below are rough trends from recent years and are only a guide:
| College group (Punjab, open merit) | Recent closing aggregate (approx.) |
|---|---|
| Top Lahore colleges (e.g., KEMU, AIMC) | About 93–96% (2024) |
| Other leading public colleges (e.g., Services, FJMU, Nishtar) | About 91–94% (2024) |
| Newer public colleges in smaller cities | Usually a few points lower |
| Private medical colleges | Much lower, based on each college’s own merit list |
These are approximate, unofficial figures for guidance only. Check the official merit lists published by UHS or your admitting university.
Other provinces
Sindh, Khyber Pakhtunkhwa and Balochistan conduct their own admission processes through their admitting universities (for example, KMU in KP). Domicile and quota rules apply, so a student with the same aggregate can have different chances in different provinces.
Tips to Improve Your Chances
- Fill preferences wisely: add a realistic mix of colleges, not only the top three.
- Check domicile and quota seats: some seats are reserved for specific districts or groups.
- Apply to private colleges as backup, considering fees carefully.
- Consider BDS, DPT, pharmacy and allied health programmes if MBBS merit is out of reach.
- Plan a reattempt if you were close; MDCAT is half your aggregate, and a better score can change everything.
- Watch official notices from UHS and PMDC instead of rumours on social media.
How to Calculate Your Aggregate Manually (Step by Step)
If you want to check the calculator’s answer by hand, follow these simple steps with a normal calculator or your phone:
- Step 1 – Matric part: divide your Matric marks by the total marks and multiply by 10. Example: 1000 ÷ 1100 = 0.909, × 10 = 9.09.
- Step 2 – FSc part: divide your FSc marks by the total and multiply by 40. Example: 950 ÷ 1100 = 0.8636, × 40 = 34.55.
- Step 3 – MDCAT part: divide your MDCAT score by 180 and multiply by 50. Example: 150 ÷ 180 = 0.8333, × 50 = 41.67.
- Step 4 – Add them: 9.09 + 34.55 + 41.67 = 85.31%. Small differences in the second decimal are due to rounding.
Universities usually calculate up to four decimal places, because thousands of students are separated by tiny differences. Two students with 90.1234% and 90.1229% can end up in different colleges, so do not round your aggregate up when comparing it with last year’s merit lists.
Common Mistakes Students Make
- Using the wrong total marks: some boards changed totals from 1100 to 1200. Use the exact total printed on your result card.
- Forgetting equivalence: O and A Level students must use the marks given in their IBCC equivalence certificate, not their own conversion.
- Comparing with the wrong year: a hard MDCAT paper usually means lower closing merits, and an easy paper means higher ones. Compare trends, not one number.
- Ignoring deadlines: admission portals open and close quickly. Missing the online application or document verification can cost you a seat even with a high aggregate.
- Trusting fake merit lists: only official lists from UHS, PMDC or your admitting university count.
Typical admission steps after the MDCAT result
| Stage | What happens |
|---|---|
| 1. Online application | Apply on the admitting university’s portal and upload documents |
| 2. College preferences | Choose and order the colleges you want |
| 3. Provisional merit list | Check your aggregate and any objections window |
| 4. Selection lists | Seats are allocated by merit, preference and quota |
| 5. Joining | Report to your college with original documents and fee |
FAQs about MDCAT Aggregate
How is the MDCAT aggregate calculated?
Aggregate = (Matric/total × 10) + (FSc/total × 40) + (MDCAT/180 × 50).
Is there negative marking in MDCAT?
No. MDCAT has no negative marking, so attempt every question.
What aggregate is needed for a government medical college?
In recent years, top public colleges in Punjab have closed above about 90%. Requirements vary by college, province and year.
Can I improve my aggregate by reappearing in MDCAT?
Yes. Since MDCAT counts for 50%, a higher score in the next attempt can significantly improve your aggregate, subject to the rules of that year.
Do O and A Level students use the same formula?
Yes, but they first need IBCC equivalence certificates to convert their grades into marks.
Calculate your aggregate above and share it in the comments if you want suggestions for college preferences. Best of luck to all MDCAT candidates!